FFC

Meritec offers the following stocked FPDI-1 cable assemblies.

FFC-DF-9 Female:Female

9803FFA1T3-3.00

DF-9 Female/Female, A-1 Orientation, 3″ long

Pitch: 0.5mm
Contacts: 31
Length: 3.0″
Orientation: A-1 (Up – Up) Pin #1 to Pin #1
Connector Mfg: Hirose
Model/Series: DF-9

FFC-DF-9 Female:Female

9803FFA1T3-6.00

DF-9 Female/Female, A-1 Orientation, 6″ long

Pitch: 0.5mm
Contacts: 31
Length: 3.0″
Orientation: A-1 (Up – Up) Pin #1 to Pin #1
Connector Mfg: Hirose
Model/Series: DF-9

FFC-DF-9 Female:Female

9803FFA1T3-12.00

DF-9 Female/Female, A-1 Orientation, 12″ long

Pitch: 0.5mm
Contacts: 31
Length: 12″
Orientation: A-1 (Up – Up) Pin #1 to Pin #1
Connector Mfg: Hirose
Model/Series: DF-9

FFC-DF-9 Female:Female

9803FFA1T4-3.00

DF-9 Female/Female, A-1 Orientation, 3″ long

Pitch: 0.5mm
Contacts: 41
Length: 3″
Orientation: A-1 (Up – Up) Pin #1 to Pin #1
Connector Mfg: Hirose
Model/Series: DF-9

FFC-DF-9 Female:Female

9803FFA1T4-6.00

DF-9 Female/Female, A-1 Orientation, 6″ long

Pitch: 0.5mm
Contacts: 41
Length: 6″
Orientation: A-1 (Up – Up) Pin #1 to Pin #1
Connector Mfg: Hirose
Model/Series: DF-9

FFC-DF-9 Female:Female

9803FFA1T4-12.00

DF-9 Female/Female, A-1 Orientation, 12″ long

Pitch: 0.5mm
Contacts: 41
Length: 12″
Orientation: A-1 (Up – Up) Pin #1 to Pin #1
Connector Mfg: Hirose
Model/Series: DF-9

FFC-DF-9 Female:Female

9803FFA1T5-6.00

DF-9 Female/Female, A-1 Orientation, 6″ long

Pitch: 0.5mm
Contacts: 51
Length: 6″
Orientation: A-1 (Up – Up) Pin #1 to Pin #1
Connector Mfg: Hirose
Model/Series: DF-9

FFC-DF-9 Female:Female

9803FFA1T5-12.00

DF-9 Female/Female, A-1 Orientation, 12″ long

Pitch: 0.5mm
Contacts: 51
Length: 12″
Orientation: A-1 (Up – Up) Pin #1 to Pin #1
Connector Mfg: Hirose
Model/Series: DF-9

Meritec’s 31 Position FPDI-1 Display cables utilize male or female Hirose DF-9 or equivalent connectors and .5mm pitch laminated cable. Designed for critical mechanical applications, this design affords space savings, easy installation and overall cost effectiveness for your FPD application. Meritec offers both stocked cable assemblies as well as a variety of flex, fold and shielding options for customer specified build to order cable assemblies.

Meritec offers a 31 Position Extraction Tool for easy removal of the 31 Position cable assembly. Please consult factory for information on P/N 989909-31.

Features & Benefits

  • Meets FPDI-1 standards
  • 0.5mm laminated cable
  • 31, 41 or 51 position male & female Hirose DF-9 or equivalent connectors
  • Molded strain relief
  • Reliable termination
  • Low profile
  • Suitable in notebook hinge areas
  • Extraction tools available
  • FPDI-1 assemblies U.L. listed under file # E-147226
  • RoHS compliant
Options
  • Ferrites
  • Shielding
  • Length & fold options
  • ZIF (.5mm) end
  • Transition boards for various pitch
  • ChassisLoc for panel mounting
  • SnapLoc for positive retention to the PCB
  • Solder prep for direct attachment to the PCB

Specifications

Electrical
  • Contact Resistance: 30 milliohm (max)
  • Dielectric Withstanding Voltage: 300V RMS (min) at 60Hz
  • Current Rating: 0.50 AMPS
  • Insulation Resistance: >109 ohms at 500 DC

Contacts

  • Material: Copper alloy
  • Finish: Tin
  • Insertion Force: 197 grams
  • Withdrawal Force: 30 grams
Environmental
  • Material: U.L. flame rating 94V-1
  • Temperature Rating: -40°C to +105°C

Cable

  • Insulator: Polyester
  • Conductor: Flat solid 33 Awg equivalent
  • Plating: Tin Bismuth
  • Minimum Bend Radius: 0.020″
  • Length Tolerances: Under 12″ ± 0.25″
  • Length measured from end to end in inches, including connectors

Meritec’s 41 Position FPDI-1 Display cables utilize male or female Hirose DF-9 or equivalent connectors and .5mm pitch laminated cable. Designed for critical mechanical applications, this design affords space savings, easy installation and overall cost effectiveness for your FPD application. Meritec offers both stocked cable assemblies as well as a variety of flex, fold and shielding options for customer specified build to order cable assemblies.

Meritec offers a 41 Position Extraction Tool for easy removal of the 41 Position cable assembly. Please consult factory for information on P/N 989909-31.

Specifications

Electrical
  • Contact Resistance: 30 milliohm (max)
  • Dielectric Withstanding Voltage: 300V RMS (min) at 60Hz
  • Current Rating: 0.50 AMPS
  • Insulation Resistance: >109 ohms at 500 DC

Contacts

  • Material: Copper alloy
  • Finish: Tin
  • Insertion Force: 197 grams
  • Withdrawal Force: 30 grams
Environmental
  • Material: U.L. flame rating 94V-1
  • Temperature Rating: -40°C to +105°C

Cable

  • Insulator: Polyester
  • Conductor: Flat solid 33 Awg equivalent
  • Plating: Tin Bismuth
  • Minimum Bend Radius: 0.020″
  • Length Tolerances: Under 12″ ± 0.25″
  • Length measured from end to end in inches, including connectors

Features & Benefits

  • Meets FPDI-1 standards
  • 0.5mm laminated cable
  • 31, 41 or 51 position male & female Hirose DF-9 or equivalent connectors
  • Molded strain relief
  • Reliable termination
  • Low profile
  • Suitable in notebook hinge areas
  • Extraction tools available
  • FPDI-1 assemblies U.L. listed under file # E-147226
  • RoHS compliant
Options
  • Ferrites
  • Shielding
  • Length & fold options
  • ZIF (.5mm) end
  • Transition boards for various pitch
  • ChassisLoc for panel mounting
  • SnapLoc for positive retention to the PCB
  • Solder prep for direct attachment to the PCB

Meritec’s 51 Position FPDI-1 Display cables utilize male or female Hirose DF-9 or equivalent connectors and .5mm pitch laminated cable. Designed for critical mechanical applications, this design affords space savings, easy installation and overall cost effectiveness for your FPD application. Meritec offers both stocked cable assemblies as well as a variety of flex, fold and shielding options for customer specified build to order cable assemblies.

Meritec offers a 51 Position Extraction Tool for easy removal of the 51 Position cable assembly. Please consult factory for information on P/N 989909-31.

Specifications

Electrical
  • Contact Resistance: 30 milliohm (max)
  • Dielectric Withstanding Voltage: 300V RMS (min) at 60Hz
  • Current Rating: 0.50 AMPS
  • Insulation Resistance: >109 ohms at 500 DC

Contacts

  • Material: Copper alloy
  • Finish: Tin
  • Insertion Force: 197 grams
  • Withdrawal Force: 30 grams
Environmental
  • Material: U.L. flame rating 94V-1
  • Temperature Rating: -40°C to +105°C

Cable

  • Insulator: Polyester
  • Conductor: Flat solid 33 Awg equivalent
  • Plating: Tin Bismuth
  • Minimum Bend Radius: 0.020″
  • Length Tolerances: Under 12″ ± 0.25″
  • Length measured from end to end in inches, including connectors

Features & Benefits

  • Meets FPDI-1 standards
  • 0.5mm laminated cable
  • 31, 41 or 51 position male & female Hirose DF-9 or equivalent connectors
  • Molded strain relief
  • Reliable termination
  • Low profile
  • Suitable in notebook hinge areas
  • Extraction tools available
  • FPDI-1 assemblies U.L. listed under file # E-147226
  • RoHS compliant
Options
  • Ferrites
  • Shielding
  • Length & fold options
  • ZIF (.5mm) end
  • Transition boards for various pitch
  • ChassisLoc for panel mounting
  • SnapLoc for positive retention to the PCB
  • Solder prep for direct attachment to the PCB
ChassisLoc is a companion FPDI-1 product designed to facilitate panel mounting of the Meritec FPDI-1 cable assemblies. Consult factory for information and/or quote on the following ChassisLoc part numbers: 989910-31, 989910-41 and 989910-51.

SnapLoc is a companion FPDI-1 product designed for the Meritec FPDI-1 cable assemblies to promote positive retention to the PCB. Consult factory for information and/or quote on the following SnapLoc part numbers: 989911-31, 989911-41, and 989911-51.

DF-9 FPDI-1 Benefits

  • Rugged over molded strain relief on the Hirose DF-9 (FPDI-1) assemblies.
  • Resistance welded wire to contact terminations
  • Shielding types available: Aluminum Foil, Silver Ink Cable Pitch: 0.5mm Pitch
  • UL Listed File #E147226
  • Connector Pin Count Available: 31, 41, 51
  • RoHS Compliant