144 Position CP50 Board Mount Connector
The Meritec CP50 (MXI-2) I/O line of cable assemblies and board mount products has been specifically designed for applications requiring cost-effective solutions to high pin density and demanding electrical specifications with shielding. The heart of this system is a Meritec patented contact, proven by many years of experience. This unique contact system allows for impedance matching, while at the same time, the low insertion force allows as many as 500 contacts per connector with less than 50 pounds of mating force. All connections are welded in an SPC controlled automatic “step and repeat” termination station.

The jacket and shield of the bundled cables are terminated in the backshells in a unique way to provide the highest reliability to both the strain relief and continuity of the shield. Meritec now offers a flexible bundled cable solution using a 30 awg bundled cable that terminates the same as our existing bundled cables. So not only are you getting the highest reliability to both the strain relief and continuity of the shield, but now you’re given more flexibility in routing these assemblies within the cabinet.

Computer programming for special machined configurations provides the only inexpensive quick turnaround method to allow running changes during your development program. For longer production requirements and additional cost savings, die cast backshells are used. Exacting applications that may require special clockline lengths, skew tolerances, or ground bussing configurations can be easily accommodated.

This product is available with standard shielded jacketed cables of twisted pairs, 50 or 75 ohm coax, or 100 ohm parallel pairs in either 28 or 30 AWG primary conductors.

Meritec has developed a variety of right angle and vertical mount PWB connectors designed to mate with the Meritec CP50 (MXI2) cable assemblies. Available in both male and female genders, there are also various tail lengths designed to accommodate customized board thickness. See the attached product drawings and test reports for further information regarding Meritec’s CP50 (MXI2) Connectors. Consult the factory for price and delivery.

VIEW THE FLIPPABLE CP50 CATALOG

Meritec 144 Position CP50 Connector Vertical Mount

980144-01-R1

Product: 144 Pos. CP50 connector
Pitch: 1.27mm (.050″)
Plating: 30µ Au over 50µ Min Ni
Vertical Mount: Female
4- Row, Thru Hole-Mount (THR)
Solder Tail Length: 6.35mm (.250″)

Meritec 144 Position CP50 Connector Vertical Mount

980144-02-R1

Product: 144 Pos. CP50 connector
Pitch: 1.27mm (.050″)
Plating: 30µ Au over 50µ Min Ni
Vertical Mount: Female
4- Row, Thru Hole-Mount (THR)
Solder Tail Length: 2.54mm (.100″)

Meritec 144 Position CP50 Connector Vertical Mount

980144-03-R1

Product: 144 Pos. CP50 connector
Pitch: 1.27mm (.050″)
Plating: 30µ Au over 50µ Min Ni
Vertical Mount: Female
4- Row, Thru Hole-Mount (THR)
Solder Tail Length: 3.17mm (.125″)

Meritec 144 Position CP50 Connector Vertical Mount

980144-04-R1

Product: 144 Pos. CP50 connector
Pitch: 1.27mm (.050″)
Plating: 30µ Au over 50µ Min Ni
Vertical Mount: Female
4- Row, Thru Hole-Mount (THR)
Solder Tail Length: 3.56mm (.140″)

Meritec 144 Position CP50 Connector Right Angle Mount

980154-144-FR1

Product: 144 Pos. CP50 connector
Pitch: 1.27mm (.050″)
Plating: 30µ Au over 50µ Min Ni
Right Angle (RA) Mount: Female
4- Row, Thru Hole-Mount (THR)
Solder Tail Length: 2.54mm (.100″)

Meritec 144 Position CP50 Connector Straight to Straight Configuration

981128-XXX

Product: 144 Pos. CP50 Cable
Pitch: 1.27mm (.050″)
Plating: 30µ Au over 50µ Min Ni
Straight to Straight Configuration
4- Row Cable Plug
XXX = Length in Meters

144 Position CP50 Cable Straight to RA Feed Through Configuration

981129-XXX

Product: 144 Pos. CP50 Cable
Pitch: 1.27mm (.050″)
Plating: 30µ Au over 50µ Min Ni
Straight to RA Feed Thru Configuration
4- Row Cable Plug
XXX = Length in Meters

144 Position CP50 Cable RA to RA Feed Through Configuration

981130-XXX

Product: 144 Pos. CP50 connector
Pitch: 1.27mm (.050″)
Plating: 30µ Au over 50µ Min Ni
RA to RA Feed ThruConfiguration
4- Row Cable Plug
XXX = Length in Meters

Features & Benefits

  • Adapter/converters
  • Low insertion force
  • High reliability
  • Low reflection
  • Shielded integrity
  • Efficient pin utilization
  • Quality control, SPC
  • High density
  • Available system compatibility
  • CNC metal backshells
  • Patented dual wipe contact
  • Welded connections
  • 50 or 75 ohm single end matched impedance
  • 100 ohm differential matched impedance
  • Unique cable strain relief
  • Ground bussing options available
  • Die cast protection
  • .050 contact spacing