FPDI-1 Display Cables
MERITEC FPDI-1 Display Cables
Product Details
31 POSITION
Meritec’s 31 Position FPDI-1 Display cables utilize male or female Hirose DF-9 or equivalent connectors and .5mm pitch laminated cable. Designed for critical mechanical applications, this design affords space savings, easy installation and overall cost effectiveness for your FPD application. Meritec offers both stocked cable assemblies as well as a variety of flex, fold and shielding options for customer specified build to order cable assemblies.
Meritec offers a 31 Position Extraction Tool for easy removal of the 31 Position cable assembly. Please consult factory for information on P/N 989909-31.
FEATURES & BENEFITS
- Meets FPDI-1 standards
- 0.5mm laminated cable
- 31, 41 or 51 position male & female Hirose DF-9 or equivalent connectors
- Molded strain relief
- Reliable termination
- Low profile
- Suitable in notebook hinge areas
- Extraction tools available
- FPDI-1 assemblies UL Recognized under file # E-147226
- RoHS Compliant product available
Options
- Ferrites
- Shielding
- Length & fold options
- ZIF (.5mm) end
- Transition boards for various pitch
- ChassisLoc for panel mounting
- SnapLoc for positive retention to the PCB
- Solder prep for direct attachment to the PCB
SPECIFICATIONS
Electrical
- Contact Resistance: 30 milliohm (max)
- Dielectric Withstanding Voltage: 300V RMS (min) at 60Hz
- Current Rating: 0.50 AMPS
- Insulation Resistance: >109 ohms at 500 DC
Environmental
- Material: UL Recognized Flame Rating 94V-1
- Temperature Rating: -40°C to +105°C
Contacts
- Material: Copper alloy
- Finish: Tin
- Insertion Force: 197 grams
- Withdrawal Force: 30 grams
Cable
- Insulator: Polyester
- Conductor: Flat solid 33 Awg equivalent
- Plating: Tin Bismuth
- Minimum Bend Radius: 0.020″
- Length Tolerances: Under 12″ ± 0.25″
- Length measured from end to end in inches, including connectors
41 POSITION
Meritec’s 41 Position FPDI-1 Display cables utilize male or female Hirose DF-9 or equivalent connectors and .5mm pitch laminated cable. Designed for critical mechanical applications, this design affords space savings, easy installation and overall cost effectiveness for your FPD application. Meritec offers both stocked cable assemblies as well as a variety of flex, fold and shielding options for customer specified build to order cable assemblies.
Meritec offers a 41 Position Extraction Tool for easy removal of the 41 Position cable assembly. Please consult factory for information on P/N 989909-31.
FEATURES & BENEFITS
- Meets FPDI-1 standards
- 0.5mm laminated cable
- 31, 41 or 51 position male & female Hirose DF-9 or equivalent connectors
- Molded strain relief
- Reliable termination
- Low profile
- Suitable in notebook hinge areas
- Extraction tools available
- FPDI-1 assemblies UL Recognized under file # E-147226
- RoHS Compliant product available
Options
- Ferrites
- Shielding
- Length & fold options
- ZIF (.5mm) end
- Transition boards for various pitch
- ChassisLoc for panel mounting
- SnapLoc for positive retention to the PCB
- Solder prep for direct attachment to the PCB
SPECIFICATIONS
Electrical
- Contact Resistance: 30 milliohm (max)
- Dielectric Withstanding Voltage: 300V RMS (min) at 60Hz
- Current Rating: 0.50 AMPS
- Insulation Resistance: >109 ohms at 500 DC
Environmental
- Material: UL Recognized Flame Rating 94V-1
- Temperature Rating: -40°C to +105°C
Contacts
- Material: Copper alloy
- Finish: Tin
- Insertion Force: 197 grams
- Withdrawal Force: 30 grams
Cable
- Insulator: Polyester
- Conductor: Flat solid 33 Awg equivalent
- Plating: Tin Bismuth
- Minimum Bend Radius: 0.020″
- Length Tolerances: Under 12″ ± 0.25″
- Length measured from end to end in inches, including connectors
51 POSITION
Meritec’s 51 Position FPDI-1 Display cables utilize male or female Hirose DF-9 or equivalent connectors and .5mm pitch laminated cable. Designed for critical mechanical applications, this design affords space savings, easy installation and overall cost effectiveness for your FPD application. Meritec offers both stocked cable assemblies as well as a variety of flex, fold and shielding options for customer specified build to order cable assemblies.
Meritec offers a 51 Position Extraction Tool for easy removal of the 51 Position cable assembly. Please consult factory for information on P/N 989909-31.
FEATURES & BENEFITS
- Meets FPDI-1 standards
- 0.5mm laminated cable
- 31, 41 or 51 position male & female Hirose DF-9 or equivalent connectors
- Molded strain relief
- Reliable termination
- Low profile
- Suitable in notebook hinge areas
- Extraction tools available
- FPDI-1 assemblies UL Recognized components
- RoHS compliant
Options
- Ferrites
- Shielding
- Length & fold options
- ZIF (.5mm) end
- Transition boards for various pitch
- ChassisLoc for panel mounting
- SnapLoc for positive retention to the PCB
- Solder prep for direct attachment to the PCB
SPECIFICATIONS
Electrical
- Contact Resistance: 30 milliohm (max)
- Dielectric Withstanding Voltage: 300V RMS (min) at 60Hz
- Current Rating: 0.50 AMPS
- Insulation Resistance: >109 ohms at 500 DC
Environmental
- Material: UL Recognized Flame Rating 94V-1
- Temperature Rating: -40°C to +105°C
Contacts
- Material: Copper alloy
- Finish: Tin
- Insertion Force: 197 grams
- Withdrawal Force: 30 grams
Cable
- Insulator: Polyester
- Conductor: Flat solid 33 Awg equivalent
- Plating: Tin Bismuth
- Minimum Bend Radius: 0.020″
- Length Tolerances: Under 12″ ± 0.25″
- Length measured from end to end in inches, including connectors
CHASSISLOC
ChassisLoc is a companion FPDI-1 product designed to facilitate panel mounting of the Meritec FPDI-1 cable assemblies. Consult factory for information and/or quote on the following ChassisLoc part numbers: 989910-31, 989910-41 and 989910-51.
SNAPLOC
SnapLoc is a companion FPDI-1 product designed for the Meritec FPDI-1 cable assemblies to promote positive retention to the PCB. Consult factory for information and/or quote on the following SnapLoc part numbers: 989911-31, 989911-41, and 989911-51.
DF-9 FPDI-1 BENEFITS
- Rugged over molded strain relief on the Hirose DF-9 (FPDI-1) assemblies.
- Resistance welded wire to contact terminations
- Shielding types available: Aluminum Foil, Silver Ink Cable Pitch: 0.5mm Pitch
- UL Recognized components
- Connector Pin Count Available: 31, 41, 51
- RoHS Compliant product available
DF-9 FPDI-1 PART NUMBERS
| PN | Name | Description | Contact | Pitch |
|---|---|---|---|---|
| 9803FFA1T3-3.00 | FPDI | 9803FFA1T3-3.00 | 3"Len DF-9 Female/Female, A-1 Orientation Connector Mfg Hirose | 31 | 0.5mm |
| 9803FFA1T3-4.00 | FPDI | 9803FFA1T3-4.00 | 4"Len DF-9 Female/Female, A-1 Orientation Connector Mg Hirose | 31 | 0.5mm |
| 9803FFA1T3-6.00 | FPDI | 9803FFA1T3-6.00 | 6"Len DF-9 Female/Female, A-1 Orientation Connector Mg Hirose | 31 | 0.5mm |
| 9803FFA1T3-12.00 | FPDI | 9803FFA1T3-12.00 | 12"Len DF-9 Female/Female, A-1 Orientation Connector Mg Hirose | 31 | 0.5mm |
| 9803FFA1T4-3.00 | FPDI | 9803FFA1T4-3.00 | 3"Len DF-9 Female/Female, A-1 Orientation Connector Mg Hirose | 41 | 0.5mm |
| 9803FFA1T4-6.00 | FPDI | 9803FFA1T4-6.00 | 6"Len DF-9 Female/Female, A-1 Orientation Connector Mg Hirose | 41 | 0.5mm |
| 9803FFA1T4-12.00 | FPDI | 9803FFA1T4-12.00 | 12"Len DF-9 Female/Female, A-1 Orientation Connector Mg Hirose | 41 | 0.5mm |
| 9803FFA1T5-6.00 | FPDI | 9803FFA1T5-6.00 | 6"Len DF-9 Female/Female, A-1 Orientation Connector Mg Hirose | 51 | 0.5mm |
| 9803FFA1T5-12.00 | FPDI | 9803FFA1T5-12.00 | 12"Len DF-9 Female/Female, A-1 Orientation Connector Mg Hirose | 51 | 0.5mm |
Supporting Documents
RELATED PRODUCTS
NEED HELP?
ASK AN EXPERT
If you would like to talk to someone about a product or technical advice, contact one of experts for assistance.
Contact Us
We will get back to you as soon as possible.
Please try again later.
About Meritec
Meritec is the electronic connector and cable assembly division of parent company, Ohio Associated Enterprises, LLC (“Associated Enterprises”). Founded in 1967, The Company has firmly established itself in the global Electronic Interconnection Industry.
We Seek & Solve Critical Connectivity Challenges.
Contact
Phone: 1-888-MERITEC
Email: info@meritec.com
Address: 1382 W Jackson St, Painesville, OH, United States, Ohio
Hours: Mon-Fri 8:00am-5:00pm
About Meritec
Meritec is a full-scale designer and manufacturer of high-performance electronic connectors and cable assemblies. With nearly six decades of innovation, Meritec serves its global customers with solutions specializing in ruggedized, high-density Embedded Computing products for Mil/Aero, Telecom, and Datacom, and high-speed interconnects for Medical and Automated Test Equipment (ATE) applications.
We Seek & Solve Critical Connectivity Challenges.
Contact
1382 W Jackson St.
Painesville, Ohio 44077
United States
Mon-Fri 8:00am-5:00pm
All Rights Reserved | Meritec
