This Right Angle Through-Hole PCIe connector solves space problem in applications where a card edge connector is needed and where low clearance above PCB prohibits use of vertical configurations.
Features & Benefits
- Parallel Daughter card mating for low profile applications
- Plastic cover protects connectors from dust and debris, and supports connector for hybrid soldering applications requiring convection/IR heating
- Compliant board locating posts
- Compatible with convection / IR process
- Card slot heights 5.84mm to 16.68mm
- Insert molded using liquid crystal polymer for stability in hybrid board applications involving surface mount components
- Offer PCB design flexibility
- Designed to mate with .062″ thick daughter card
- Meets PCIe 2.1, 100 ohm, specifications
- RoHS Compliant product available
Specifications
Electrical
- Contact Resistance: 40 milliohm nominal
- Dielectric Withstanding Voltage: 300 VDC
- Current Rating: 1.1 AMP per contact
- Insulation Resistance: 100 Megaohms (minimum)
- Material: U.L. rated 94 V-O
- Temperature Rating: -40°C to +105°C
Environmental
Mechanical
- Standard Contact Finish: contact and solder tail finish surface consists of 5μ Au over 50μ min Ni
- Custom Contact Finish: Specific gold plating thickness available upon request
- Insertion Force: 150 grams (max)/opposing contact pair
- Optional, lower cost, contact finish: 5μ min Au on contact interface end and 100μ min whisker mitigating matte Sn on contact tails, over 50μ min Ni over entire contact
- Contact Material: Copper alloy
- Number of Contacts: X1=36, X4=64, X8=98, X16=164, X24=230
- Normal Force: 5 grams (min)/contact
- Dielectric Material: Glass filled liquid crystal polymer (black)